Information On Electric Bumper Cars

When at a funfair, you will often see children as well as adults using the popular amusement ride known as the bumper car. These vehicles are usually surrounded by inflatable PVC or rubber and are designed to crash into each other.

Bumper cars for sale for Australia run off electricity and use one of three power-supply systems. These include the ceiling-grid bumper cars that attract currents from a ceiling grid through what is known as a hot-rod. The current drawn is what will drive the motor inside the body of the bumper car. Once the motor has been activated, it will drive wheels that cause them to rotate through belts.

The second type is the floor-grid bumper cars that draw its power from a conductive floor surface. There are conductive brushes situated underneath the vehicle that cover two-strips that are opposite in polarities. This makes sure that there is a completed circuit.

The battery-powered bumper cars, uses batteries that are positioned inside the car to power up the portable amusement rides for sale in Australia. These batteries are dischargeable and rechargeable. When the car is on, the devices inside the body of the bumper car will form complete circuits.

Electric Power Bumper Cars

Ceiling Grid Bumper Cars

Ceiling-grid bumper cars are known as the more common and classic car. In order to operate this system, the cars are set-up to the ceiling-grid along with specialized floors that provide power polarities. The electrical bumper cars for in australia funfair used requires alternating currents.

Ground Grid Bumper Cars

Ground-grid bumper cars are known as the next generation in the dodgem car. These rides do not make use of the ceiling grid, but rather are powered up by a floor-powered grid. These bumper car rides are also known for offering an increased safety grade.

How Electric Bumper Cars Get Power And How They Run

The Conductive Ceiling And Conductive Floor, Hot Rod System

This type of power supply system is the more common as well as traditional, which was highly popular back in the day. This system uses contacts that run from the ceiling to the floor with separated power polarities. The hot rod functions as a type of conductive wire. A completed circuit is achieved when switched on. The bumper cars then draw a current from the grid on the ceiling, and the current runs through the hot rods. This current the powers up the motor inside of each of the bumper cars.

Kids electric bumper car rides

The Conductive Floor System For Floor Grid Bumper Cars

This newer version of bumper cars like in the http://australiaamusementrides.com/bumper-cars-for-sale-in-australia/, uses a specialized floor. This floor consists of three portions. One of these will be the positive-strips, the other negative strips and the last part is known as insulating spacers. The system works on alternating strips that run across the surface of the floor and are separated with the insulating spacers. When the brushes underneath the bumper cars are covering two strips at the same time, a completed circuit is developed. These rides fromĀ http://australiaamusementrides.com/ derive power from the conductive flooring and the conductive brushes under the cars are powered up by opposite polarities in association to the strips.